{"product_id":"2-piece-hartk-stealthburner-toolhead-pcb-by-ldo-motors","title":"2-piece Hartk Stealthburner Toolhead PCB by LDO Motors","description":"\u003ciframe src=\"https:\/\/spinzam.com\/shot\/embed\/?idx=397206\" width=\"500\" height=\"500\" style=\"max-width: 100%; max-height: 100vw;\" frameborder=\"0\" scrolling=\"no\"\u003e\u003c\/iframe\u003e\n\u003cp dir=\"auto\"\u003eThis comes completely assembled with no need for soldering anything on the PCB. \u003cstrong\u003eThis is the board that is included with newer LDO Trident and V2.4 kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThe second PCB plugs into the main PCB, specifically made to connect your 4010\/5015 fan and LEDs by soldering to the PCB. It is intended as an additional convenience piece.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003eThe Stealthburner PCB is based on hartk's \u003ca class=\"is-external-link\" href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/Stealthburner_Toolhead_PCB\" data-mce-href=\"https:\/\/github.com\/VoronDesign\/Voron-Hardware\/tree\/master\/Stealthburner_Toolhead_PCB\"\u003etwo piece toolhead PCB\u003c\/a\u003e design. The design consists of:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe main toolhead PCB - which installs into the wiring enclose in the side of the Clockwork 2 extruder.\u003c\/li\u003e\n\u003cli\u003eThe fan adapter PCB - which installs onto the back of the 5015 fan in the Stealthburner main body.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWhile the LDO stealthburner PCB uses the same PCB outline as the hartk's design, it uses a different circuit design. The LDO version is designed to be completely compatible with the original LDO breakout PCB (see \u003ca class=\"is-internal-link is-valid-page\" href=\"https:\/\/docs.ldomotors.com\/voron\/toolhead_harness#the-breakout-pcb\" data-mce-href=\"https:\/\/docs.ldomotors.com\/voron\/toolhead_harness#the-breakout-pcb\"\u003ebelow\u003c\/a\u003e) while requiring only a small number of cable modifications for those upgrading from the old LDO afterburner PCB.\u003c\/p\u003e\n\u003ch3 class=\"toc-header\" id=\"pinout-main-toolhead-pcb\"\u003ePinout: Main Toolhead PCB\u003c\/h3\u003e\n\u003cp\u003eThe table below briefly describes the purpose of each port located on the toolhead PCB. \u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB Label\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHE0\u003c\/td\u003e\n\u003ctd\u003eHotend Heater\u003c\/td\u003e\n\u003ctd\u003eE0508 Ferrule\u003c\/td\u003e\n\u003ctd\u003ePort for hotend heater cartridge.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTH0\u003c\/td\u003e\n\u003ctd\u003eHotend Thermistor\u003c\/td\u003e\n\u003ctd\u003eJST-XH-2P\u003c\/td\u003e\n\u003ctd\u003eThermistor port for hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eXES\u003c\/td\u003e\n\u003ctd\u003eX Endstop\u003c\/td\u003e\n\u003ctd\u003eJST-XH-2P\u003c\/td\u003e\n\u003ctd\u003eX endstop port. Only used in Switchwire builds, unused in V2 and Trident.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePROBE\u003c\/td\u003e\n\u003ctd\u003eProbe\u003c\/td\u003e\n\u003ctd\u003eJST-XH-3P\u003c\/td\u003e\n\u003ctd\u003eProbe port. Accepts 24V inductive probes, also compatible with \u003ca class=\"is-external-link\" href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\" data-mce-href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\"\u003eklicky \u003c\/a\u003eprobes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eE-STEP\u003c\/td\u003e\n\u003ctd\u003eE Stepper Motor\u003c\/td\u003e\n\u003ctd\u003eJST-XH-4P\u003c\/td\u003e\n\u003ctd\u003eExtruder stepper motor port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCT\u003c\/td\u003e\n\u003ctd\u003eChamber Thermistor\u003c\/td\u003e\n\u003ctd\u003eJST-XH-2P\u003c\/td\u003e\n\u003ctd\u003eConnects to an external thermistor for more accurate chamber temperature readings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eFan Adapter Header\u003c\/td\u003e\n\u003ctd\u003e2x8 M-Header\u003c\/td\u003e\n\u003ctd\u003ePlugs into the female header on the Fan Adapter PCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eToolhead Cable\u003c\/td\u003e\n\u003ctd\u003eMicrofit3-14P\u003c\/td\u003e\n\u003ctd\u003eThis port connects to the 14pin toolhead cable.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eNeopixel Cable\u003c\/td\u003e\n\u003ctd\u003eMicrofit3-2P\u003c\/td\u003e\n\u003ctd\u003eThis port connects to the 2pin neopixel cable. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/docs.ldomotors.com\/toolhead_wiring_kit\/sb_pcb_pinout.png\" data-mce-src=\"https:\/\/docs.ldomotors.com\/toolhead_wiring_kit\/sb_pcb_pinout.png\"\u003e\u003c\/figure\u003e\n\u003ch3 class=\"toc-header\" id=\"pinout-fan-adapter-pcb\"\u003ePinout: Fan Adapter PCB\u003c\/h3\u003e\n\u003cp\u003eThe table below briefly describes the purpose of each port located on the toolhead PCB. \u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePCB Label\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHEF+\/A1\/HEF-\u003c\/td\u003e\n\u003ctd\u003eHotend Fan*\u003c\/td\u003e\n\u003ctd\u003eJST-PH-3P\u003c\/td\u003e\n\u003ctd\u003eFan port for cooling the hotend heatsink. 24V\/5V selectable, defaults to 24V.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePCF+\/A2\/PCF-\u003c\/td\u003e\n\u003ctd\u003ePart Cooling Fan*\u003c\/td\u003e\n\u003ctd\u003eJST-PH-3P\u003c\/td\u003e\n\u003ctd\u003ePort for part cooling fan. 24V\/5V selectable, defaults to 24V.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5V\/GND\/LED\u003c\/td\u003e\n\u003ctd\u003eNeopixel\u003c\/td\u003e\n\u003ctd\u003eJST-PH-3P\u003c\/td\u003e\n\u003ctd\u003eFor connecting to the neopixel chain on the stealthburner.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003c\/td\u003e\n\u003ctd\u003eToolhead Cable\u003c\/td\u003e\n\u003ctd\u003e2x8 F-Header\u003c\/td\u003e\n\u003ctd\u003ePlugs into the male header on the main toolhead PCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e*The hotend fan and part fan can be independently changed to 5V in two steps: \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSevere the 24V connection by cutting the trace between the 24V pad and V_HEF\/V_PCF pad\u003c\/li\u003e\n\u003cli\u003eMake a soldered bridge connection between the 5V pad and V_HEF\/V_PCF pad\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cfigure class=\"image\"\u003e\u003cimg src=\"https:\/\/docs.ldomotors.com\/toolhead_wiring_kit\/sb_fan_adapter_pinout.png\" data-mce-src=\"https:\/\/docs.ldomotors.com\/toolhead_wiring_kit\/sb_fan_adapter_pinout.png\"\u003e\u003c\/figure\u003e\n\u003cdiv class=\"snippet-clipboard-content notranslate position-relative overflow-auto\"\u003e\n\u003cdiv class=\"snippet-clipboard-content notranslate position-relative overflow-auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003e More information can be found \u003ca title=\"LDO Docs toolhead PCB\" href=\"https:\/\/docs.ldomotors.com\/en\/voron\/toolhead_harness\" data-mce-href=\"https:\/\/docs.ldomotors.com\/en\/voron\/toolhead_harness\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e \u003c\/p\u003e","brand":"West3D 3D Printing Supplies","offers":[{"title":"Default Title","offer_id":50612167246110,"sku":"LDO1276","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0956\/7754\/6782\/files\/2-piece-hartk-stealthburner-toolhead-pcb-by-ldo-motors-west3d-printing-ldo-motors-913225.jpg?v=1771084186","url":"https:\/\/hobbyistdepot.com\/products\/2-piece-hartk-stealthburner-toolhead-pcb-by-ldo-motors","provider":"Hobbyist Depot","version":"1.0","type":"link"}